96U Microsilica used in oxide bonded silicon carbide product

96U Microsilica used in oxide bonded silicon carbide product

Blogs
Silicon carbide is the main crystalline phase, and the oxide is a bonded refractory fired product (silicon bonded silicon carbide products, mullite bonded silicon carbide products, etc.). Widely used in metallurgy, ceramics, building materials and other industries. SiO2 ≥ 96.5% high-grade microsilica can be used for the production of silicon…
Read More
Micro silica fume used in thermal insulation materials

Micro silica fume used in thermal insulation materials

Blogs
Thermal insulation materials are usually light, loose, porous and low thermal conductivity materials. The thermal conductivity of commonly used thermal insulation materials is less than 623K (350 ℃), and the thermal conductivity should be less than 0.14W / (M. K). Thermal insulation material can slow down heat flow rate produced…
Read More
Insulation mortar mix ratio

Insulation mortar mix ratio

Blogs
1.  Polystyrene pellet insulation mortar Ordinary silicate 42.5 cement            700kg High-quality microsilica                  70-105kg Heavy calcium (fly ash or ash calcium powder)300kg Copolymer condensation powder                5-10kg Hydroxypropyl methyl cellulose ether(HPMC)    5-10kg Polypropylene staple fiber                     2kg 6. External wall adhesive mortar Ordinary silicate 42.5 cement           400kg High-quality microsilica                  40-60kg Silica sand (40-70…
Read More
Microsilica fume used as dispersing agent for chemical products

Microsilica fume used as dispersing agent for chemical products

Blogs
In order to prevent the agglomeration of some chemical synthetic powders, the application of microsilica powder can replace the more expensive processing materials, but it is necessary to accurately grasp the proportion of use. Norway, France and Italy are all using this method, so that the application of dispersing agent…
Read More
Silica fume as high-strength admixture in concrete industry

Silica fume as high-strength admixture in concrete industry

Blogs
The use of micro-silica fume as adulterating agent in the concrete industry is the earliest, most successful and widely used fields in the comprehensive utilization of micro-silica fume. Because microsilica has the characteristics of fine particles, large specific surface area, high purity of SiO2, strong volcanic ash activity and other…
Read More
Microsilica for Alumina–Mullite Ceramic Composites

Microsilica for Alumina–Mullite Ceramic Composites

Blogs
Mullite(3Al2O3.2SiO2) is a ceramic material with high temperature stability, high temperature creep resistance, high temperature mechanical properties and excellent chemical stability, low temperature expansion and good electrical insulation. As high-temperature refractory material and composite materials, mullite is widely used in such fields as national defense, industry and civil use. The…
Read More